Gu 鼓 means the drum, the percussive instrument.
A challenging model that is deftly crafted by our new Collaborative Craftsman Li Qiu Lin!
Craftsman Li crafted this impressive-looking, stately and wide-stanced Ru Yi Gu, with the Ru Yi 如意 motifs, two on each side of the curvaceous lid knob, and the carefully appointed twelve raised dots on the rim of shoulder line of this work.
Notice the "Qian Gai" 嵌盖 Lid-to-Body Interface, is the most difficult to craft Lid-to-Body interface (compared to the other two interfaces, the Jie Gai 截盖 and the Tian Ya Di 天压地 interfaces).
Very adorable as the Qian Gai circular rim, together with the dots, mimic the drum skin ala in a real drum! Also notice the bottom: the surface being uniformly, totally flat! devoid of any unduly warping/deformation during firing as the ZiSha shrinks within the kiln.
Lovingly made by our trusted and committed collaborative Craftsman Li Qiu Lin 李秋林。 He thanks you for your grandest support to the honest and dedicated Craftsladies and Craftsmen here left to fend the Fully-Handmade ZiSha Art.
Thank you dearest Friends in Tea, for your grandest support to these honest and dedicated Craftsmen left to fend the Fully-Handmade ZiSha Art and Craft! Thank you for all your support for Craftsman Li! Enjoy his superb, classic handwork!!!and let his work accompany you on your tea journey! Thank you Friends!
BRING ONE HOME, USE IT and you will know all about Fully-Handmade ZiSha, the feel of real and quality YiXing ZiSha, the nurturing of Patina, how the true Patina feels and looks like, the Aura exuded from a Fully-Handmade Pot which others simply can't bring forth, and, Craftsman Li's skills, savour the pour. You will know everything then.
~~~~~~~~~~
Here with us in our happy family of true ZiSha connoisseurs and friends, you witness 90-120 photos taken of EACH Fully-Handmade ZiSha work here.
Compare this to elsewhere: factory bosses of jigger-machined non-zisha pots contribute downstream to their retailers: 5-10 stock photos for each non-zisha pot model, used to sell a stock of 10, 20, 30 jigger-machined non-zisha pots per model. I.e. 5-10 photos to sell hundreds of one model.
We at RealZiSha, take 90-120 photos, fresh, of EACH, ONE, Fully-Handmade ZiSha work. Together with our sacrificial and hardworking Craftsmen and Artists committed to honest true Fully-Handmade ZiSha Art and Craft, we at RealZiSha go the aeons' distance.
~~~~~~~~~~
Explained, https://www.realzisha.com/blogs/news/actual-zisha-landscape-at-yixing , the Craftsman by selling his hard-worked ZiSha craft at $190-$240, $45-$65 goes to the cost of the craft, inclusive of the fees for the firing for the kiln operator (three times per pot), the packaging boxes, and between $32 to $52 for the clay (Zi Ni Di Cao Qing, Duan Ni and upwards) used per pot. Craftsman takes 3 days (fastest 2.5days) to craft a pot.
If he works 30 days a month without a single day of rest (no family time), he will craft 10-12 pots.
If he crafts for 25 days (five days of rest a month), his output will be 8-10 pots.
The success rate for Zi Ni (e.g. Di Cao Qing, Lao Zi Ni, Da Shui Tan etc) and Duan Ni (e.g. Jiang Po Ni, Qing Hui Duan, etc) is 70% on average. Some times the whole batch of 10 may fail. We have seen our Craftsmen suffer like this very often.
The success rate for Zhu Ni (e.g. Xiao Mei Yao Zhu Ni) pots is 60%, or 70% with most optimism and at the very, very best. Unfortunately.
All of us at RealZiSha of course, hope for one another, professional colleagues and all, that all the pots will survive firing at the kiln successfully.
[For ZiSha models/designs that are very challenging and more complicated to craft, the time taken to craft will be longer, and the failure rate will be higher as well. Zi Sha by its virtue, have the highest shrinkage rate of all ceramic clay. Zi Ni and Duan Ni thus have that 70% success rate, while Zhu Ni has even higher shrinkage rate and thus even lower success rate (the lowest of all ceramic clay.)]
Our Craftsmen are wholeheartedly committed to the cause of Fully-Handmade ZiSha Art and their strictness with their craft and dedication earn our respect. We give a big Thank You all of these Craftsmen, for they are saving what is our common precious tea culture: Tea + Fully-Handmade ZiSha Art and Craft. Your support is critical to their livelihood and the existence of this craft for all of the tea fraternity.
Thank you Friends!
~~~~~~~~~~~~~~~~~~~~~~
Again, another tremendous labor of love by our trusted and committed collaborative Craftsman Li Qiu Lin. It is a team effort and we thank you dearest Friends for your grandest support to the honest and the dedicated Craftsladies and Craftsmen here left to fend the Fully-Handmade ZiSha Art.
The lines and detailing speak oCraftsman Li Qiu Lin's EXTREME CARE AND TIME taken to craft each part, each pot. Hold one, hold up one, swing the work around. Carefully examine his Fully-Handmade work. Look at it from afar, from near, and it will grow on you, with fine detailing with MUCH THOUGHT on each part, with MUCH TIME spent on every part, section. Because this is what Fully-Handmade ZiSha Art should be, and HOW FULLY-HANDMADE ZISHA ART is so different from and light years ahead of the ubiquitous jigger-machined pots and half-handmade pots masquerading under the sales tagline of "fully-handmade zisha" pots. These latter JM/HHM pots are made in what we call 流水线 a.k.a. 'Factory-Line operation' whereby the main pot body after being jigger-machined or coming off from the mould, is passed to the next worker who fits on the spout, and subsequently this second worker will pass the pot on to another worker who will in turn fit on the handle. Continuing so, the pressed lid is likewise passed to another worker who fit on the lid knob. EACH WORKER has NO IDEA what the other one is doing, and they are always working on fixed time lines stated by the boss. For example, the worker being "passed the baton" a pot with the spout just fixed onto the body by his colleague, will only focus on fixing on the handle, with nil to little regard to WHETHER THE HANDLE fixed on will be cohesive with the spout. Each worker has NO idea of HOW THE FINAL POT WILL LOOK LIKE. Beyond poor craftsmanship and clay, the result of such processes are ugly pots with poor cohesiveness which experienced Artists, Craftsmen and collectors will tell from a metre away. Experienced people in us, do not need to pick up a pot to check whether it is fully-handmade or made of zisha, we can tell from a metre away just by looking at the pot.
~~~~~~~~~~~~
The keywords are: Detailing and Cohesiveness.
A GOOD Fully-Handmade ZiSha Work combines great detailing and cohesiveness.
~~~~~~~~~~
(Dear Friends, during the photo-taking process, five to six separate spotlights above and around, are used. Looking at the photos, the collar-rim of the lid-body interface thus shows the various spotlights' reflection. You will therefore see 2 to 3 scattered brighter spots around the collar-rim. Some friends had asked before, "is the rim-collar having any irregularity in circularity?". Thus, rest assured. Do not misconstrue the two to three brighter spots around the lid-body rim collar to mean any irregularity in circularity of the rim-collar.
Yes, the rim-collars of all these ZiSha works crafted by our Craftsmen ARE REGULAR in CIRCULARITY :-D, and you can rest assured. Thank you Friends.)
