《西施》"Xi Shi", 139.6ml, *Zhi Ma Duan Ni 芝麻段泥, AND Engraving of *Qing Gong Tu 清贡图, by Craftsman Gu Xiao Ming 顾小明。
《西施》"Xi Shi".
This is the superb Xi Shi shape embarked by our latest Craftsman Gu Xiao Ming for many of you dearest friends for the past two years!
Craftsman Gu Xiao Ming delights us this time, crafting the all time evergreen classic, the Xi Shi! with the delectable Zhi Ma Duan Ni 芝麻段泥! Zhi Ma Duan "Sesame Seed Duan Ni" is a lovely type of Duan Ni, incorporating much iron as its constituent, amidst the highly porous nature that is Duan Ni! 
Zhi Ma 芝麻 Duan Ni 段泥 is thus affectionately named, because of the speckling of iron constituents in generous quantities resemble Sesame Seeds 芝麻 :-D!
Pictorial engraving of the Qing Gong Tu 清供图 faces the Tea Master,
Examples of several Qing Gong Tu's for your admiration and understanding are here, with several of the famous ones being auctioned as well at extremely high prices in our Chinese Art fraternity, at 16.1mil rmb, 12.88mil rmb, 7.13mil rmb and 18.975mil rmb, (1 万 rmb = 10,000rmb):
~~~~~~~~~~~~
☆☆ Appreciate Craftsman Gu's DILIGENCE. This Xi Shi of his, incorporates the more difficult-to-craft Qian Gai 嵌盖 lid-to-body interface construction. This Qian Gai interface here of this Xi Shi, is DIFFERENT from the Jie Gai 截盖☆
The Qian Gai interface is the most difficult to craft interface construction, but Craftsman Gu did it because: IF DONE RIGHT + survive the firing successfully without deformation: this Qian Gai WILL give the most watertight interface (as the water has to move through TWO 90 degrees right angles before getting to leak out), and the most secure and SATISFYING, smile-inducing closure :-D
☆ ~ illustration with Craftsman Gu's series of delectable Qian Gai 嵌盖 Xi Shi's:
Craftsman Gu also conscientiously sculpted a 手推内球孔 Hand-Pushed Spherical Filter to increase the number of filter holes (Craftsman Gu manages to execute skilfully without such small confines, the 2-3-4-3-2 configuration!!!, total being 14) as being for a solid and fast pour of tea out and with better catching of tea leaves at the bottom fast while allowing tea to flow out from the upper holes.
Shrinkage of Fully-Handmade ZiSha works:
As with all Art pieces from RealZiSha here presented to all of you dearest Friends, guardians of Fully-Handmade ZiSha Art, they are premium pieces availed at the most astounding lowest prices. We want you each of you friends to get the best. You deserve it.
Craftsman Gu Xiao Ming 顾小明 thanks you dearest friends for your grandest support to the honest and dedicated Craftsmen left to fend the Fully-Handmade ZiSha Art.
Enjoy his diligence, superb, classic handwork with this Xi Shi!!!and let his work accompany you on your tea journey!
We hope to bring all of you more and more classics, for you to hold a broad view and savour the delightful landscape of ZiSha works that our YiXing fraternity has!!!
A treasure chest and our team will continue to work very hard to prepare and bring forth every single piece to you. Thank you, dearest Friends for your understanding.
~~~~~~~~~~
BRING ONE HOME, USE IT and you will know all about Fully-Handmade ZiSha, the feel of real and quality YiXing ZiSha, the nurturing of Patina, how the true Patina feels and looks like, the aura and feel manifested by a Fully-Handmade Pot which others simply can't bring forth. Savour Craftsman Gu Xiao Ming's skills. You will know everything then :-D
****************
Not resorting to moulds and half-handmaking. These dedicated Fully-Handmaking Craftsmen sacrifice their whole lives to commit to this Art and Craft. They will tell you, they will never negotiate. Fully-Handmaking ZiSha works is worth their sacrifice of their entire lifetime, they want to preserve our Chinese traditional art and craft. They want to preserve and enhance the unique character of Yixing ZiSha: the double-sized pores uniquely gifting ZiSha its character.
~~~~~~~~~~~~~
Dearest Friends, we are savouring this top Ceramic material for tea, ZiSha, and these are all the Craftsmen’s and Artists’ hard worked, Fully-Handmade pieces, with lots of preparations, intense crafting, heart aches at the kiln, all fully respecting this totally natural, and high shrinkage unpredictable clay, sensitive to even a 0.5degree in ambient temperature, and even weather (temperature, moisture, the four seasons) outside of the kiln. The 铁熔点 ~ natural black iron melted spots that irregularly and spontaneously appear anywhere and everywhere ~ we call Tie Rong Dian :-D, the “跳砂” Tiao Sha denote the observed “popped-off-spots” effect when the cute surface granulate popped off from the surface during the high shrinkage of more pasty clay around it, the “爆子” “Bao Zi” also dot the surface as those that did not pop off, hover out just enough to cling onto the surface, and the simple surface irregularities, are all due to this ceramic clay, although having the highest shrinkage, are still mercilessly and necessarily fired at 1150degC to 1250degC. These are all part of the natural ZiSha artefacts and what many modern day or Western pottery lovers affectionately call “wabi-sabi”. Our Chinese Craftsmen and Artists do not aim for wabi-sabi for the sake of wabi-sabi. Do forgive them for these natural irregularities. These Tie Rong Dian, Tiao Sha and Bao Zi, are the natural phenomena that dot the surface of our beloved top tea ceramic! YiXing ZiSha, the best ZiSha source in the whole world, and with the double-sized pores innately inherent and imbuing the best taste for any type of tea. Savour Fully-Handmade ZiSha teapot Craft and Art!
~~~~~~~~
Here with us in our happy family of true ZiSha connoisseurs, you witness 90-120 photos taken of EACH Fully-Handmade ZiSha work here.
Compare this to elsewhere: factory bosses of jigger-machining non-zisha pots contribute downstream to their retailers: 5-10 stock photos for each non-zisha pot model, used to sell a stock of 10, 20, 30 jigger-machined non-zisha pots per model. I.e. 5-10 photos to sell hundreds of one model.
We at RealZiSha, take 90-120 photos, fresh, of EACH, ONE, Fully-Handmade ZiSha work. Together with our sacrificial and hardworking Craftsmen and Artists committed to honest true Fully-Handmade ZiSha Art and Craft, we at RealZiSha go the eons' distance.
~~~~~~~~~~~~~~~~~~~~~~
Here with us in our happy family of true ZiSha connoisseurs and friends, you witness 90-120 photos taken of EACH Fully-Handmade ZiSha work here.
Compare this to elsewhere: factory bosses of jigger-machined non-zisha pots contribute downstream to their retailers: 5-10 stock photos for each non-zisha pot model, used to sell a stock of 10, 20, 30 jigger-machined non-zisha pots per model. I.e. 5-10 photos to sell hundreds of one model.
We at RealZiSha, take 90-120 photos, fresh, of EACH, ONE, Fully-Handmade ZiSha work. Together with our sacrificial and hardworking Craftsmen and Artists committed to honest true Fully-Handmade ZiSha Art and Craft, we at RealZiSha go the aeons' distance.
Again, another tremendous labor of love by our trusted and committed collaborative Craftsman Gu Xiao Ming. It is a team effort and we thank you dearest Friends for your grandest support to the honest and the dedicated Craftsmen here left to fend the Fully-Handmade ZiSha Art.
The lines and detailing speak of Craftsman Gu Xiao Ming's EXTREME CARE AND TIME taken to craft each part, each pot. Hold one, hold up one, swing the work around. Carefully examine his Fully-Handmade work. Look at it from afar, from near, and it will grow on you, with fine detailing with MUCH THOUGHT on each part, with MUCH TIME spent on every part, section. Because this is what Fully-Handmade ZiSha Art should be, and HOW FULLY-HANDMADE ZISHA ART is so different from and light years ahead of the ubiquitous jigger-machined pots and half-handmade pots masquerading under the sales tagline of "fully-handmade zisha" pots. These latter JM/HHM pots are made in what we call 流水线 a.k.a. 'Factory-Line operation' whereby the main pot body after being jigger-machined or coming off from the mould, is passed to the next worker who fits on the spout, and subsequently this second worker will pass the pot on to another worker who will in turn fit on the handle. Continuing so, the pressed lid is likewise passed to another worker who fit on the lid knob. EACH WORKER has NO IDEA what the other one is doing, and they are always working on fixed time lines stated by the boss. For example, the worker being "passed the baton" a pot with the spout just fixed onto the body by his colleague, will only focus on fixing on the handle, with nil to little regard to WHETHER THE HANDLE fixed on will be cohesive with the spout. Each worker has NO idea of HOW THE FINAL POT WILL LOOK LIKE. Beyond poor craftsmanship and clay, the result of such processes are ugly pots with poor cohesiveness which experienced Artists, Craftsmen and collectors will tell from a metre away. Experienced people in us, do not need to pick up a pot to check whether it is fully-handmade or made of zisha, we can tell from a metre away just by looking at the pot.
~~~~~~~~~~~~
The keywords are: Detailing and Cohesiveness.
A GOOD Fully-Handmade ZiSha Work combines great detailing and cohesiveness.
~~~~~~~~~
The amount of effort put behind each of our Fully-Handmade ZiSha work welcoming you, the authentic YiXing ZiSha clay, the many years of dedication and hardship committed to the craft, the proper three rounds of firing, the presentation with dedicated 80-150 photos of each work, the effort spent behind procuring 5rmb notes in running stacks from our local banks, is 100,000x, more than the what is peddled on countless websites: with cheap common ceramic clays behind the unauthentic pots, the fast, less than a minute of jigger-machining, or just the few months’ ability of newly recruited unskilled workers to churn out half-handmade pots, the simple one to two rounds of firing at convenient and lower temperatures at just only one round of firing, cheap ceramic clays that do not shrink much so as to maximise success and profits, the presentation with a set of ten photos taken per model and repeated for more than tens to thousands of stock.
And yet, Craftsmen Chen Fa Chu, Zhu Shu, Gao Xiang, Zhang Huan, Fang Shi, Yang Pin Ting, Gu Xiao Ming, Wang Xing, Wang Hui, etc, honest hardworking people are put in a really bad position, for they 1) have to compete on price with fake stuff from all around, but still 2) have to offer the honest real thing: Fully-Handmade ZiSha works. These honest Craftsmen have to lower their prices so much with their works, authentic works of extreme sacrifices, labour and experience.
Explained, https://www.realzisha.com/blogs/news/actual-zisha-landscape-at-yixing
, the Craftsman by selling his hard-worked ZiSha craft at $190-$240, $45-$65 goes to the cost of the craft, inclusive of the fees for the firing for the kiln operator (three times per pot), the packaging boxes, and between $32 to $52 for the clay (Zi Ni Di Cao Qing, Duan Ni and upwards) used per pot. Craftsman takes 3 days (fastest 2.5days) to craft a pot.
Depending on the difficulty of craft the design elements command, the difficulty of crafting with certain clay types, the rarity and hence cost of clay, the inclusion of engraving 刻绘 and/or clay sculpting e.g. Ni Hui 泥绘, Dui Hui 堆绘, Diao Su 雕塑 on the piece of work, our Craftsmen face immense cost increase, time spent, and the level of expertise and savoir-faire accumulated by sheer HARD WORK.
If he works 30 days a month without a single day of rest (no family time), he will craft 10-12 pots.
If he crafts for 25 days (five days of rest a month), his output will be 8-10 pots.
The success rate for Zi Ni (e.g. Di Cao Qing, Lao Zi Ni, Da Shui Tan etc) and Duan Ni (e.g. Jiang Po Ni, Qing Hui Duan, etc) is 70% on average. Some times the whole batch of 10 may fail. We have seen our Craftsmen suffer like this very often.
The success rate for Zhu Ni (e.g. Xiao Mei Yao Zhu Ni) pots is 60%, or 70% with most optimism and at the very, very best. Unfortunately.
All of us at RealZiSha of course, hope for one another, professional colleagues and all, that all the pots will survive firing at the kiln successfully.
[For ZiSha models/designs that are very challenging and more complicated to craft, the time taken to craft will be longer, and the failure rate will be higher as well. Zi Sha by its virtue, have the highest shrinkage rate of all ceramic clay. Zi Ni and Duan Ni thus have that 70% success rate, while Zhu Ni has even higher shrinkage rate and thus even lower success rate (the lowest of all ceramic clay.)]
Our Craftsmen are wholeheartedly committed to the cause of Fully-Handmade ZiSha Art and their strictness with their craft and dedication earn our respect. We give a big Thank You all of these Craftsmen, for they are saving what is our common precious tea culture: Tea + Fully-Handmade ZiSha Art and Craft. Your support is vital to their livelihood and the existence of this craft for all of the tea fraternity.
Thank you Friends!
~~~~~~~~~~~~~~~~~~~~~~